- Description
Description
Welded wire mesh made of corrugated or smooth wire is manufactured exclusively for high-strength construction; that is, grade 60. It can withstand or exceed the load-bearing capacity of traditional grade 50 mesh.
One of the main characteristics of welded mesh is its high tensile strength, providing the structural strength necessary for slabs, cladding, walls, prefabricated elements, etc.
It is supported by the standards: NMX–B–072–CANACERO–2017 / NMX–B–290–CANACERO–2013 (IN FORCE).
PRESENTATION: 100m2 rolls (2.5 x 40 m).
| Design | Broad | Long | Diameter | Transverse Area |
| (cm2/m) | (m) | (m) | ||
| 6×6 4/4 | 2.5 | 4 | 5.72 | 1.69 |
| 6×6 6/6 | 2.5 | 4 | 4.88 | 1.23 |
| 6×6 8/8 | 2.5 | 4 | 4.11 | 0.87 |
| 6×6 10/10 | 2.5 | 4 | 3.43 | 0.61 |
| NMX-B-72 | ||
|---|---|---|
| N/mm² | Kgf/mm² | |
| Minimum tensile strength. | 687 | 70 |
| Minimum yield strength (Minimum yield strength) | 588 | 60 |
| Minimum elongation in 10 diameters. | 5% | |
| Minimum area reduction. | 30% | |
*Theoretical values that adhere to the NMX-B standard*
