- Description
Description
The electrowelded mesh of corrugated or smooth wires are manufactured for exclusive use in high resistance construction; that is to say, grade 60. They support or exceed the load stress of the traditional meshes in grade 50.
One of the main characteristics of electrowelded mesh is its high tensile strength; it provides the necessary structural stress for slabs, cladding, walls, prefabricated elements, etc.
It is supported by the standards: NMX-B-072-CANACERO-2017 / NMX-B-290-CANACERO-2013 (CURRENT).
PRESENTATION: Rolls of 100m2 (2.5x40mts).
| Design | Width | Long | Diameter | Area Transv. |
| (cm2/m) | (m) | (m) | ||
| 6×6 4/4 | 2.5 | 4 | 5.72 | 1.69 |
| 6×6 6/6 | 2.5 | 4 | 4.88 | 1.23 |
| 6×6 8/8 | 2.5 | 4 | 4.11 | 0.87 |
| 6×6 10/10 | 2.5 | 4 | 3.43 | 0.61 |
| NMX-B-72 | ||
|---|---|---|
| N/mm². | Kgf/mm² Kgf/mm² | |
| Minimum tensile strength. | 687 | 70 |
| Minimum creep resistance(Minimum creep limit) | 588 | 60 |
| Minimum elongation in 10 diameters. | 5% | |
| Minimum area reduction. | 30% | |
*Theoretical values that comply with the NMX-B standard.
